Description
PVC F Trim
F trims can be used on the edge of a polycarbonate roofing sheet, where it sits directly on top of the timber rafter. The trim would push over the edge of the polycarbonate sheet and would continue down over the face of the timber rafter. This would then be fixed horizontally through the F trim into the rafter.
Alternatively this can be used on a piece of polycarbonate which is butted up to a wall on a pitch. Install the F trim upside down so the long leg sits pointing up against the wall, making this easy to flash over to make water tight.
These are available, depending on thickness, in 2.5m, 3m and 4m lengths
And in thickness 10mm, 16mm and 25mm
These come in White and Brown PVC
